Here is a freebie machine knitting pattern that I designed recently when the kids and I had a "Snow Day". Enjoy!
Yarn: 2 50gm balls worsted weight yarn (sample done in Cleckheaton Country 8 ply, gauge stated on the ball band is 22 sts and 30 rows = 10 cm (4”), and I used very little of the second ball)
Machine: midgauge, no ribber required (sample knit on Studio SK860, can also be knit on LK150 or Bond. MT 6
Size: Youth or ladies S (ladies L in brackets)
Finished measurements : Youth or Ladies’ S: circumference – approximately 20 cm around (8”), length - 19 cm (7 ½ “)
Ladies’ L: circumference – approximately 22 cm around (8 ½ ”), length – 22 cm (8 ½ ”)
Symbols/abbreviations: \ remove stitch from needle and replace on needle 2 sts to left (except the stitch farthest to the left, which moves only one stitch over so as not to increase the total number of stitches in work)
/ remove stitch from needle and replace on needle 2 sts to right (except the stitch farthest to the right, which moves only one stitch over so as not to increase the total number of stitches in work)
^ lift purl bar from adjacent stitch and hang on empty needle
S small
L large
T tension
MT main tension
EN every needle
EON every other needle
K knit
R row
RC row count
/ remove stitch from needle and replace on needle 2 sts to right (except the stitch farthest to the right, which moves only one stitch over so as not to increase the total number of stitches in work)
^ lift purl bar from adjacent stitch and hang on empty needle
S small
L large
T tension
MT main tension
EN every needle
EON every other needle
K knit
R row
RC row count
Special Tools: EN and EON selector tools handy, garter bar would also be useful
Special Techniques:
Triple strand “braided” e-wrap (adapted from “back and forth e-wrap” described in Mary Anne Oger’s Knitting on the Edge )
Break off three lengths of MY approximately 3X the width to be cast on. Holding three strands parallel, e-wrap cast on first and every alternate needle across. Change direction at the last needle and e-wrap back all needles skipped in the first step. See photos below.
Break off three lengths of MY approximately 3X the width to be cast on. Holding three strands parallel, e-wrap cast on first and every alternate needle across. Change direction at the last needle and e-wrap back all needles skipped in the first step. See photos below.
Basket Weave Pattern (from Susan Guagliumi’s Hand-Manipulated Stitches for Machine Knitters )
TIP: If you ensure that you are moving sts towards the carriage side of the bed, then this will make it easier to remember which direction you should be transferring the sts and you will not need to follow the chart as closely.
The transferred stitch closest to the carriage should be placed on the needle immediately adjacent (two sts on this needle) so as not to increase the overall number of stitches. All other transferred stitches should be moved in the appropriate direction by 2 sts.
TIP: If you ensure that you are moving sts towards the carriage side of the bed, then this will make it easier to remember which direction you should be transferring the sts and you will not need to follow the chart as closely.
The transferred stitch closest to the carriage should be placed on the needle immediately adjacent (two sts on this needle) so as not to increase the overall number of stitches. All other transferred stitches should be moved in the appropriate direction by 2 sts.
Instructions
CO 44 (48) sts using triple strand braided e-wrap. RC000. T10 K1R. T6 K1R. Remainder of mitten is worked at T6. Work basket weave chart to RC27 (RC30).
Leave 8 sts on carriage side in WP, all other sts to HP. Carriage on hold. E-wrap CO 8 sts. Knitting on these 16 thumb sts only, K to RC15. Dec EOS, ER 2X to 4 sts. Break yarn and thread through these 4 sts, remove from needles and gather. Push thumb to the back of the work and fold in half, return 8 sts to WP, and rehang the 8 e-wrap cast on thumb sts on these needles. Cancel hold.
RC000, keeping continuity of basket weave pattern, resume working from chart to RC27 (RC30). This marks the end of the basket weave pattern. Remainder of mitten is knit plain.
Dec E4thS across row. K2R
Dec E3rdS across row. K2R
Dec E2ndS across row. K1R
Break yarn and thread through rem sts, gathering the top of the mitten. Sew seams, braid and secure the 6 strands of yarn (from cast on) as shown in the photo, and weave in remaining ends.
Repeat for second mitten, making sure that thumb is worked on the opposite side as that of the first mitten. This may require knitting either one less or one more row before starting the thumb to ensure carriage is on correct side.
© 2007 Nancy Lobban. Pattern for personal use only.
CO 44 (48) sts using triple strand braided e-wrap. RC000. T10 K1R. T6 K1R. Remainder of mitten is worked at T6. Work basket weave chart to RC27 (RC30).
Leave 8 sts on carriage side in WP, all other sts to HP. Carriage on hold. E-wrap CO 8 sts. Knitting on these 16 thumb sts only, K to RC15. Dec EOS, ER 2X to 4 sts. Break yarn and thread through these 4 sts, remove from needles and gather. Push thumb to the back of the work and fold in half, return 8 sts to WP, and rehang the 8 e-wrap cast on thumb sts on these needles. Cancel hold.
RC000, keeping continuity of basket weave pattern, resume working from chart to RC27 (RC30). This marks the end of the basket weave pattern. Remainder of mitten is knit plain.
Dec E4thS across row. K2R
Dec E3rdS across row. K2R
Dec E2ndS across row. K1R
Break yarn and thread through rem sts, gathering the top of the mitten. Sew seams, braid and secure the 6 strands of yarn (from cast on) as shown in the photo, and weave in remaining ends.
Repeat for second mitten, making sure that thumb is worked on the opposite side as that of the first mitten. This may require knitting either one less or one more row before starting the thumb to ensure carriage is on correct side.
© 2007 Nancy Lobban. Pattern for personal use only.
1 comment:
Thanks for this, Nancy. I plan to try it when I have a little time. The basket weave stitch is nice, so is the braided cast on.
Post a Comment